 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| keysight technologies infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules data sheet
02 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet introduction see the true performance of your designs. the 86100d dca-x performs precision measurements on high-speed digital designs from 50 mb/s to more than 80 gb/s on up to 16 channels simultaneously. applications include: optical C transceiver design and manufacturing electrical C asic/fpga/ic design and characterization tdr/tdt/s-parameter C serial bus designs, cables, and pcb characterization table of contents introduction ................................................................................................................................................. 02 overview of the infiniium dca-x ................................................................................................................ 03 specifications .............................................................................................................................................. 04 modules selection table ............................................................................................................................. 09 modules specifications ............................................................................................................................... 11 typical system configurations ................................................................................................................... 23 software applications ................................................................................................................................ 24 measurements ............................................................................................................................................ 25 ordering information .................................................................................................................................. 29 keysight oscilloscopes ............................................................................................................................... 33 03 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet overview of the infiniium dca-x high-fidelity waveform characterization (yellow: raw trace, blue: de-embedded waveform) scope mode eye/mask mode fast transmitter characterization using eye diagram analysis and automated mask margin measurements tdr/tdt mode accurate time domain reflectometry/transmission and s-parameter measurements jitter mode precision jitter, amplitude, and frequency analysis capability these modes are further complimented by the following features that provide additional insight and analysis capability: C de-embedding, embedding, equalizer capability C phase noise/jitter spectrum analysis C phase locked loop (pll) analysis C and more precision measurements, more margin, and more insight the 86100d dca-x oscilloscope combines high analog bandwidth, low jitter, and low noise performance to accurately characterize optical and electrical designs from 50 mb/s to over 80 gb/s. the mainframe provides the foundation for powerful insight and measurement capability, such as de-embedding of cables and fixtures, that improve margins and allow engineers to see the true performance of their designs. the 86100d dca-x can be viewed as four powerful instruments in one: modular the modular system means that the instrument can grow to meet your needs, when you need it. theres no need to purchase capability that you dont need now. the dca-x supports a wide range of modules for testing optical and electrical designs. select modules to get the specific bandwidth, filtering, and sensitivity you need. the dca-x supports all modules in the dca family and is 100% backwards compatible with the 86100c mainframe. high channel count the dca-x can measure from one to 16 channels simultaneously with no significant loss in throughput. create an affordable high-capacity test system by measuring multiple signals in parallel. software the dca-x provides powerful analysis capability that is enabled through licensed software options. examples include 86100d-200 for fast and accurate jitter analysis, 86100d-sim for de-embedding and/or embedding of fixtures and cables, and the n1012a/N1014A/n108xa series test applications. 04 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet general and mainframe specifications describe warranted performance over the temperature range of +10 to +40 c (unless otherwise noted). the specifications are applicable for the temperature after the instrument is turned on for one hour, and while self-calibration is valid. many performance parameters are enhanced through frequent, simple user calibrations. characteristics provide useful, non-warranted information about the functions and performance of the instrument. characteristics are printed in italic typeface. product specifications and descriptions in this document are subject to change without notice. general specifications temperature operating 10 to +40 c (50 to +104 f) non-operating C40 to +65 c (C40 to +158 f) altitude operating up to 4,600 meters (15,000 feet) power (max) 100/120 vac 50/60/400 hz with typical modules: 150 to 230 va at 25 c 220/240 vac 50/60 hz, 700 w maximum weight mainframe without modules 20.5 kg (43 lbs) typical module 1.2 kg (2.6 lbs) mainframe dimensions (excluding handle) without front connectors and rear feet 221 mm (h) x 426 mm (w) x 530 mm (d) (7 in x 16.76 in x 20.9 in) with front connectors and rear feet 234 mm (h) x 426 mm (w) x 601 mm (d) (9.23 in x 16.76 in x 23.67 in) with front cover and rear feet 234 mm (h) x 426 mm (w) x 612 mm (d) (9.23 in x 16.76 in x 24.1 in) max relative humidity 80% for temperatures up to 31 c decreasing linearly to 50% relative humidity at 40 c supply voltage variation 86100d system can operate with supply voltage fluctuations up to 10% of the nominal voltage mainframe specifications horizontal system (time base) pattern lock scale factor (full scale is ten divisions) minimum 2 ps/div (with 86107a or 86100d-ptb: 500 fs/div) maximum 1 s/div 250 ns/div delays 1 minimum 24 ns 40.1 ns default, 24 ns min maximum 1000 screen diameters or 10 s whichever is smaller 1000 screen diameters or 25.401 s whichever is smaller time interval accuracy 2,3 1 ps + 1.0% of time reading or 8 ps, whichever is smaller jitter mode operation 4 time interval accuracy - jitter mode operation 1 ps time interval resolution (screen diameter)/(record length) or 62.5 fs, whichever is larger display units bits or time (tdr modeCmeters) vertical system (channels) number of channels 16 (simultaneous acquisition) vertical resolution 54xxx, 83xxx, 86xxx: 14 bit a/d converter (16 or more bits with averaging). n10xx: 16 bit a/d converter full resolution channel adjusts in a 1-2-5-10 sequence for coarse adjustment or fine adjustment resolution from the front panel knob adjustments scale, offset, activate filter, sampler bandwidth, attenuation factor, transducer conversion factors record length legacy ui: 16 to 16 k samples flexdca without pattern lock: 16 to 64 k samples flexdca with pattern lock: 16 up to 32 m samples 5 1. time offset relative to the front panel trigger input on the instrument mainframe. 2. dual marker measurement performed at a temperature within 5 c of horizontal calibration temperature. 3. the maximum delay setting is 100 ns and delta time does not span across (28 + nx4) ns 100 ps delay setting, where n=0,1,2.18. if delta time measurement span exceeds above criteria, time interval accuracy is 8 ps +0.1% of time reading. 4. characteristic performance. test configuration: prbs of length 127 bits, data and clock 10 gb/s. 5. maximum number of samples depends on pattern, number of active channels and available memory. specifications comparing specifications when comparing performance attributes between instruments, ensure you compare the same type of parameter. for example, compare warranted specifications from both instruments, or compare characteristics or typical performance. warranted specifications include measurement uncertainties and are conservative compared to other types of unwarranted attributes. factory calibration cycle - for optimum performance, the instrument should have a complete verification of specifications once every twelve months. 05 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet mainframe specifcations (continued) 86100d with option str 86100d with option etr or with options etr + ptb module triggering 3 not supported not supported internal trigger free run free run external direct trigger (dc coupled) limited bandwidth dc to 100 mhz dc to 100 mhz full bandwidth dc to 3.2 ghz dc to 3.2 ghz trigger configuration triggering level adjustment C1 v to +1 v C1 v to +1 v edge select positive or negative positive or negative hysteresis 2 normal or high sensitivity normal or high sensitivity trigger sensitivity sinusoidal or 200 ps minimum pulse width sinusoidal or 200 ps minimum pulse width 200 mvpp 200 mvpp maximum input signal 2 vpp 2 vpp system jitter tested at 2.5 ghz, 200 mvpp tested at 2.5 ghz, 200 mvpp 1.5 ps rms + 50 ppm of delay setting 1.5 ps rms + 50 ppm of delay setting < 1.0 ps rms + 5 ppm of delay setting (characteristic) < 1.0 ps rms + 5 ppm of delay setting (characteristic) specifications (continued) 06 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet mainframe specifcations (continued) 86100d with option str 86100d with option etr or with options etr + ptb external divided trigger (ac coupled) not available with option str input frequency range n/a 50 mhz - 13 ghz (effective divide by 2) 50 mhz - 15 ghz (characteristic) option ptb: 50 mhz - 32 ghz (effective divide by 1) pattern lock frequency range n/a 50 mhz - 13 ghz 50 mhz - 15 ghz (characteristic) option ptb: 50 mhz - 32 ghz pattern lock pattern length range n/a 1 to 2^23 ui in scope and eye/mask modes 1 to 2^16 ui in jitter mode trigger sensitivity n/a slew rate > 2 v/ns: 200 mvpp maximum input signal n/a max trigger input: 2 vpp option ptb: max ptb input: 1.3 vpp with dc offset up to + 200 mv system jitter n/a tested at 10 ghz, 200 mvpp 1.2 ps rms for time delays less than 100 ns, (maximum) 750 fs rms at minimum delay setting, (characteristic) option ptb when ptb is enabled: condition 1 : 2.4 ghz < 4.0 ghz trigger, tested at 2.4 ghz, 750 mvpp 200 fs (characteristic) < 400 fs, with 54xxx, 8348x, or n1045a (non option loj) module (characteristic) condition 1 : 4 ghz 9.0 ghz trigger, tested at 5 ghz, 750 mvpp 120 fs (characteristic) < 400 fs, with 54xxx, 8348x, or n1045a (non option loj) module (characteristic) condition 1 : > 9.0 ghz 44.0 ghz trigger, tested at 10, 20, and 40 ghz, 500 mvpp 90 fs (characteristic) < 200 fs, with 54xxx, 8348x, or n1045a (non option loj) module(characteristic) inputs trigger input connector 2.92 mm (male) 4 2.92 mm (male) 4 option ptb: ptb input: 2.92 mm (male) 4 trigger input nominal impedance q q option ptb: specifications (continued) 1. the internal precision timebase works with typical digital clock signals, such as a bert output, as well as sine waves. if the rise time or fall time of the clock signal is less than 15% of the period of the clock (for example, less than 15 ps for a 10 ghz clock), reduce the edge speed by using an external low-pass filter. or length of cable. for the lowest jitter, use a signal that is as close as possible to the maximum signal amplitude (1.3 vpp) and minimize any sub-harmonics. 2. high sensitivity hysteresis mode improves the high frequency trigger sensitivity but is not recommended when using noisy, low frequency signals that may result in false triggers without normal hysteresis enabled. 3. module triggering enables precision waveform analyzer modules (86108), clock recovery modules (83496) and tdr modules to be used as a trigger source. without support for module triggering, external connections between the module and the mainframe may be required. 4. 86100d mainframes ship with a 2.92mm (f) to (f) adapter for this port. 07 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet computer system and storage computer system and storage cpu intel core i5 3550s cpu at 3.0 ghz mass storage 80 gb internal hard drive (default) or 80 gb removable hard drive (option 090) operating system microsoft windows 7 embedded standard (64 bit) display 1 display area 210.4 mm x 157.8 mm (10.4 inch diagonal color active matrix lcd module incorporating amorphous silicon tfts) entire display resolution 1024 pixels horizontally x 768 pixels vertically waveform colors select from over 16 colors; user may change color assignment of all traces (channels, waveform memory and signal processing functions) persistence modes gray scale, color grade, variable, infinite waveform overlap when two waveforms overlap, a third color distinguishes the overlap area (classic dca-j interface only) connect-the-dots on/off selectable persistence minimum, variable (100 ms to 40 s), infinite graticule on/off grid intensity 0 to 100% dialog boxes opaque or transparent front panel inputs and outputs cal output bnc (female) and test clip, banana plug trigger input 2.92 mm 4 usb 2 three low-power usb 2.0 ports; voltage: 5.00 0.25 v; current: 100 ma each precision timebase input (option ptb only) 2.92 mm 4 rear panel inputs and outputs gated trigger input ttl compatible video output vga, full color, 15 pin d-sub (female) 10 gpib 3 fully programmable, complies with ieee 488.2 rs-232 9 pin d-sub (male) lan usb 2 four usb 2.0 ports; voltage: 5.00 0.25 v; current: 500 ma each precision timebase delay path (option ptb only) two female sma connectors, nominal length jumper cable included 1. supports external display. supports multiple display configurations via windows xp pro display utility. 2. usb keyboard and mouse included with mainframe. 3. the gpib card interface is optional. to include this interface, order 86100d-gpi. 4. mainframe ships with 2.92 mm female-female connector saver (p/n 1250-4105). specifications (continued) 08 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet precision time base 86108a/b 86108a 86108b-lbw 86108b-hbw typical jitter (clock recovery (cr) and precision timebase (ptb) configuration) < 60 fs < 60 fs < 50 fs maximum jitter (clock recovery and precision timebase configuration) 1 < 90 fs < 90 fs < 70 fs typical jitter (clock recovery without precision timebase active) < 1.25 ps < 1.25 ps < 1.25 ps effective trigger-to-sample delay (cr and ptb configuration, typical) < 200 ps < 200 ps < 200 ps typical jitter (trigger signal applied to precision timebase input) < 60 fs < 60 fs < 60 fs maximum jitter (trigger signal supplied to precision timebase input) 1 < 100 fs < 100 fs < 100 fs precision timebase trigger bandwidth 2 to 13.5 ghz (1 to 17 ghz) 1 to 18 ghz 1 to 18 ghz precision timebase external reference amplitude characteristic 1.0 to 1.6 vpp 1.0 to 1.6 vpp 1.0 to 1.6 vpp precision timebase input signal type 2 sinusoid sinusoid sinusoid precision timebase maximum input level 2 v (16 dbm) 2 v (16 dbm) 2 v (16 dbm) precision timebase maximum dc offset level 200 mv 200 mv 200 mv precision timebase input impedance 50 ? 50 ? 50 ? precision timebase connector type 3 3.5 mm male 3.5 mm male 3.5 mm male timebase resolution (with precision timebase active) 0.5 ps/div 0.5 ps/div 0.5 ps/div timebase resolution (precision timebase disabled) 2 ps/div 2 ps/div 2 ps/div 1. verified with maximum level input signal (~800 mvpp) 2. the precision timebase performs optimally with a sinusoidal input. non-sinusoidal signals will operate with some degradation in timebase linearity. 3. 86108b-lbw are shipped with a 3.5 mm (female) to 3.5 mm (female) connector saver on the input channels (p/n 5061-5311). the 86108b-hbw is shipped with 2.4 mm female to 2.4 mm female connector savers on the input channels. precision time base (86108 configurations) the 86108 has an integrated precision timebase within the plug-in module. the 86108a/b can be triggered through clock recovery of the observed signal, through an external reference clock into the precision timebase section, or with the precision timebase operating on the clock signal recovered from the observed signal. the following specifications indicate the 86100 system timebase specifications achieved when using the 86108a/b plug-in module. (the 86100 mainframe and the 86108a/b module can also be triggered with a signal into the mainframe. in this configuration, the basic mainframe specifications are achieved.) if the 86108a/b is placed in a mainframe that has an integrated precision timebase (86100d-ptb), the integrated mainframe precision timebase is disabled. specifications (continued) 09 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet 1. module has receptacle to supply power for external probe. 2. pick any four rates (155 mb/s to 6.25 gb/s). 3. this module is not compatible with the 86100a and 86100b digital communication analyzer (dca) mainframes. if you would like to upgrade older dcas contact keysight technologies and ask for current trade-in deals. 4. the 86108a/b uses all module slots and includes an internal clock recovery and precision timebase capabilities. 5. 4 optical input ports are switched internally to two optical-to-electrical (o/e) converters. 6. all modules with optical channels can use option irc to enhance the effective operating range. reference receivers can be created at any rate within 50% of the hardware capability. irc also corrects non-ideal (but compliant) hardware performance to yield ideal reference receiver responses. 7. with option irc. requires flexdca using pattern lock, 86100d mainframe with option etr, and signals <= prbs16-1. for more details, see application note techniques for higher accuracy optical measurements (keysight literature number 5990-8812en). 8. requires 86100d mainframe (not compatible with 86100a/b/c). 9. generally represents the power level where an ideal eye diagram will approach 0% mask margin due to noise of the oscilloscope. provides a non-specified figure of merit to compare sensitivities of various optical channels. 10. a 15 gb/s filter is provided with option 281 and 282 that closely approximates the response required for 16x fibre channel compliance testing. contact keysight for a special option that verifies compliance of the 86105d-281 and 86115d-282 to the 16x fibre channel reference receiver specification. 86105c 6 100 2 1 1 750 to 1650 8.5 20 62.5 C20 7 7 7 7 7 7 7 7 200 1 1 750 to 1650 8.5 20 62.5 C16 7 7 7 300 2 1 1 750 to 1650 8.5 20 62.5 C16 7 86105d 3, 6 1 1 750 to 1650 20 35 62.5 C12 7 7 7 7 7 100 1 1 750 to 1650 20 35 62.5 C12 7 7 7 7 7 7 200 1 1 750 to 1650 20 35 62.5 C12 7 7 7 7 7 7 7 7 7 7 7 7 7 86105d 281 1 1 750 to 1650 34 50 62.5 C7 7 7 7 7 7 7 7 7 10 7 7 7 86115d 3, 6 002 2 0 750 to 1650 20 62.5 C12 7 7 7 7 7 102 2 0 750 to 1650 20 62.5 C12 7 7 7 7 7 7 142 2 0 750 to 1650 20 62.5 C12 7 7 7 7 7 7 7 7 7 7 7 7 7 004 5 4 0 750 to 1650 20 62.5 C11 7 7 7 7 7 104 4 0 750 to 1650 20 62.5 C11 7 7 7 7 7 7 144 4 0 750 to 1650 20 62.5 C11 7 7 7 7 7 7 7 7 7 7 7 7 7 86115d 282 2 0 750 to 1650 34 50 62.5 C7 7 7 7 7 7 7 7 7 10 7 7 7 86116c 3, 6 025 1 1 1300 to 1620 45 80 9 C10 7 7 7 7 7 7 7 7 7 7 7 7 7 86116c 3, 6 041 1 1 1300 to 1620 65 80 9 C5 7 7 7 module option no. of optical channels no. of electrical channels tdr/tdt/s-parameters probe power 1 wavelength range (nm) unfiltered optical bandwidth (ghz) electrical bandwidth (ghz) fiber input (m) mask test sensitivity (dbm) 9 155 mb/s 622 mb/s 1063 mb/s 1244/1250 mb/s 2125 mb/s 2488/2500 mb/s 2.666 gb/s 3.125 gb/s 4.25 gb/s 5.00 gb/s 6.25 gb/s 8.50 gb/s 9.953 gb/s 10.3125 gb/s 10.51875 gb/s 10.664 gb/s 10.709 gb/s 11.096 gb/s 11.317 gb/s 14.025 gb/s 25.80 gb/s 27.70 gb/s 28.05 gb/s 39.813 gb/s 41.250 gb/s 43.018 gb/s filtered data rates 86100 family plug-in module matrix the 86100 has a family of plug-in modules designed for a broad range of precision optical, electrical, and tdr/tdt measure - ments. the 86100d can accommodate up to 4 modules for a total of 16 measurement channels. also consider the n1090 and n1092 dca-m solutions from keysight which support additional data rates. download the n1090a, n1092a/b/c/d/e and n1094 dca-m optical and electrical sampling oscilloscopes datasheet from www.keysight.com/find/n1092a. modules selection table 10 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet 1. module has receptacle to supply power for external probe. 2. this module is not compatible with the 86100a and 86100b digital communication analyzer (dca) mainframes. if you would like to upgrade older dcas contact keysight technologies and ask for current trade-in deals. 3. the 86108a/b uses all module slots and includes internal clock recovery and precision timebase capabilities. 4. requires 86100d mainframe (not compatible with 86100a/b/c). 86100 family plug-in module matrix (continued) the 86100 has a family of plug-in modules designed for a broad range of precision optical, electrical, and tdr/tdt measure - ments. the 86100d can accommodate up to 4 modules for a total of 16 measurement channels. modules selection table (continued) 54754a 0 2 18 86108a 3, 4 0 2 32 86108b 3, 4 lbw 0 2 35 hbw 0 2 50 86112a 0 2 20 hbw 0 2 30 86118a 0 2 70 n1045a 4 02f/02m 0 2 60 n1045a 4 04f/04m 0 4 60 n1046a 4 71f 0 1 75 n1046a 4 81f 0 1 85 n1046a 4 11f 0 1 100 n1046a 4 72f 0 2 75 n1046a 4 82f 0 2 85 n1046a 4 12f 0 2 100 n1046a 4 74f 0 4 75 n1046a 4 84f 0 4 85 n1046a 4 14f 0 4 100 n1055a 4 32f/32m 0 2 35 n1055a 4 34f/34m 0 4 35 n1055a 4 52f/52m 0 2 50 n1055a 4 54f/54m 0 4 50 module option no. of optical channels no. of electrical channels tdr/tdt/s-parameters probe power 1 electrical bandwidth (ghz) 11 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet single-mode and multimode optical/electrical multiple and single-mode optical/electrical modules 86105c 86105d 86105d option 281 optical channel specifications optical channel unfiltered bandwidth 8.5 ghz (9 ghz) 20 ghz (22 ghz) 34 ghz wavelength range 750 to 1650 nm 750 to 1650 nm 750 to 1650 nm calibrated wavelengths 850 nm/1310 nm/1550 nm 850 nm/1310 nm/1550 nm 850 nm/1310 nm/1550 nm optical sensitivity 1 850 nm: 850 nm: 850 nm: C 2.666 gb/s, C20 dbm C 8.5 to 11.3 gb/s, C9 dbm C 15 gb/s, C9 dbm C > 2.666 to 4.25 gb/s, C19 dbm C 14.025 gb/s, C6 dbm C 25.78 gb/s, C6 dbm C > 4.25 to 11.3 gb/s, C16 dbm C 27.85 to 28.05 gb/s, C5 dbm 1310 nm/1550 nm: 1310 nm/1550 nm: 1310 nm/1550 nm: C 2.666 gb/s, C21 dbm C 8.5 to 11.3 gb/s, C12 dbm C 15 gb/s, C8 dbm C > 2.666 to 4.25 gb/s, C20 dbm C 14.025 gb/s, C9 dbm C 25.78 gb/s, C7 dbm C > 4.25 to 11.3 gb/s, C17 dbm C 27.95 to 28.05 gb/s, C6 dbm 1550 nm: C 15 gb/s, C8 dbm C 25.78 gb/s, C8 dbm C 27.95 to 28.05 gb/s, C7 dbm transition time (10 to 90% calculat - ed from tr = 0.48/bw optical) 56 ps 24 ps 15 ps rms noise characteristic 850 nm: 850 nm: 850 nm: C 2.666 gb/s, 1.3 w C 8.5 to 11.3 gb/s, 10 w C 15 gb/s, 9 w C > 2.666 to 4.25 gb/s, 1.5 w C 14.025 gb/s, 16 w C 25.78 gb/s, 17 w C > 4.25 to 11.3 gb/s, 2.5 w C 27.95 to 28.05 gb/s, 18 w C unfiltered, 25 w 1310 nm/1550 nm: 1310/1550 nm: 1310 nm: C 2.666 gb/s, 0.8 w C 8.5 to 11.3 gb/s, 5 w C 25.78 gb/s, 13 w C > 2.666 to 4.25 gb/s, 1.0 w C 14.025 gb/s, 8 w C unfiltered, 18 w C > 4.25 to 11.3 gb/s, 1.4 w 1550 nm: C 15 gb/s, 8 w C 25.78 gb/s, 15 w C 27.95 to 28.05 gb/s, 17 w C unfiltered, 21 w maximum 850 nm: 850 nm: 850 nm: C 2.666 gb/s, 2.0 w C 8.5 to 11.3 gb/s, 12 w C 15 gb/s, 15 w C > 4.25 gb/s to 11.3 gb/s, 4.0 w C 14.025 gb/s, 24 w C 25.78 gb/s, 25 w C 27.95 to 28.05 gb/s, 25 w C unfiltered, 35 w 1310 nm/1550 nm: 1310/1550 nm: 1310 nm: C 2.666 gb/s, 1.3 w C 8.5 to 11.3 gb/s, 7 w C 15 gb/s, 12 w C > 2.666 to 4.25 gb/s, 1.5 w C 14.025 gb/s, 12 w C 25.78 gb/s, 20 w C > 4.25 to 11.3 gb/s, 2.5 w C 27.95 to 28.05 gb/s, 20 w C unfiltered, 25 w 1550 nm: C 15 gb/s, 14 w C 25.78 gb/s, 23 w C 27.95 to 28.05 gb/s, 23 w C unfiltered, 30 w 1. generally represents the power level where an ideal eye diagram will approach 0% mask margin due to noise of the oscilloscope. provides a non-specified figure of merit to compare sensitivities of various optical channels. 2. options 102 and 104 do not include filters for 14.025 gb/s. options 142 and 144 include filters for 14.025 gb/s and no other rates. modules specifications 12 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet single-mode and multimode optical/electrical (continued) multiple and single-mode optical/electrical modules 86115d option 002, 102, 142 2 86115d option 004, 104, 144 2 86115d option 282 optical channel specifications optical channel unfiltered bandwidth 20 ghz (22 ghz) 20 ghz (22 ghz) 34 ghz wavelength range 750 to 1650 nm 750 to 1650 nm 750 to 1650 nm calibrated wavelengths 850 nm/1310 nm/1550 nm 850 nm/1310 nm/1550 nm 850 nm/1310 nm/1550 nm optical sensitivity 1 850 nm: 850 nm: 850 nm: C 8.5 to 11.3 gb/s, C9 dbm C 8.5 to 11.3 gb/s, C8 dbm C 15 gb/s, C9 dbm C 14.025 gb/s, C6 dbm C 14.025 gb/s, C5 dbm C 25.78 gb/s, C6 dbm C 27.85 to 28.05 gb/s, C5 dbm 1310 nm/1550 nm: 1310/1550 nm: 1310 nm/1550 nm: C 8.5 to 11.3 gb/s, C12 dbm C 8.5 to 11.3 gb/s, C11 dbm C 15 gb/s, C8 dbm C 14.025 gb/s, C9 dbm C 14.025 gb/s, C8 dbm C 25.78 gb/s, C7 dbm C 27.95 to 28.05 gb/s, C6 dbm 1550 nm: C 15 gb/s, C8 dbm C 25.78 gb/s, C8 dbm C 27.95 to 28.05 gb/s, C7 dbm transition time (10 to 90% calculated from tr = 0.48/bw optical) 24 ps 24 ps 15 ps rms noise characteristic 850 nm: 850 nm: 850 nm: C 8.5 to 11.3 gb/s, 10 w C 8.5 to 11.3 gb/s, 12 w C 15 gb/s, 9 w C 14.025 gb/s, 16 w C 14.025 gb/s, 20 w C 25.78 gb/s, 17 w C 27.95 to 28.05 gb/s, 18 w C unfiltered, 25 w 1310/1550 nm: 1310/1550 nm: 1310 nm: C 8.5 to 11.3 gb/s, 5 w C 8.5 to 11.3 gb/s, 6 w C 25.78 gb/s, 13 w C 14.025 gb/s, 8 w C 14.025 gb/s, 10 w C unfiltered, 18 w 1550 nm: C 15 gb/s, 8 w C 25.78 gb/s, 15 w C 27.95 to 28.05 gb/s, 17 w C unfiltered, 21 w maximum 850 nm: 850 nm: 850 nm: C 8.5 to 11.3 gb/s, 12 w C 8.5 to 11.3 gb/s, 14 w C 15 gb/s, 15 w C 14.025 gb/s, 24 w C 14.025 gb/s, 30 w C 25.78 gb/s, 25 w C 27.95 to 28.05 gb/s, 25 w C unfiltered, 35 w 1310/1550 nm: 1310/1550 nm: 1310 nm: C 8.5 to 11.3 gb/s, 7 w C 8.5 to 11.3 gb/s, 8.5 w C 15 gb/s, 12 w C 14.025 gb/s, 12 w C 14.025 gb/s, 14 w C 25.78 gb/s, 20 w C 27.95 to 28.05 gb/s, 20 w C unfiltered, 25 w 1550 nm: C 15 gb/s, 14 w C 25.78 gb/s, 23 w C 27.95 to 28.05 gb/s, 23 w C unfiltered, 30 w 1. generally represents the power level where an ideal eye diagram will approach 0% mask margin due to noise of the oscilloscope. provides a non-specified figure of merit to compare sensitivities of various optical channels. 2. options 102 and 104 do not include filters for 14.025 gb/s. options 142 and 144 include filters for 14.025 gb/s and no other rates. modules specifications (continued) 13 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet single-mode and multimode optical/electrical (continued) multiple and single-mode optical/electrical modules 86105c 86105d 86105d option 281 86115d option 002, 102, 142 2 86115d option 004, 104, 144 2 optical channel specifications (continued) scale factor (per division) minimum 2 w 20 w 20 w 20 w 20 w maximum 100 w 500 w 500 w 500 w 500 w cw 1 accuracy (single marker, referenced to average power monitor) single-mode: 25 w 3% single-mode: C 25 w 2% (8/10 gb/s) C 4% (14 gb/s) C 6% (unfiltered) C 25 w 4% (14.025 gb/s) C 25 w 4% (15.0 gb/s) C 25 w 6% (25.78125 gb/s) C 25 w 6% (27.7393 gb/s to 28.05 gb/s) C 25 w 6% (unfiltered) single-mode: C 25 w 2% (8/10 gb/s) C 4% (14 gb/s) C 6% (unfiltered) single-mode: C 25 w 2% (8/10 gb/s) C 4% (14 gb/s) C 6% (unfiltered) multimode: 25 w 10% multimode: 25 w 10% multimode: 25 w 10% multimode: 25 w 10% cw offset range (referenced two divisions from screen bottom) +0.2 to C0.6 w +1 w/C3 w +1 to C3 mw +1 w/C3 w +1 w/C3 w average power monitor (specified operating range) C30 to 0 dbm C30 to +3 dbm C30 to +3 dbm C30 to +3 dbm C30 to +3 dbm average power monitor accuracy single-mode 5% 200 nw 5% 200 nw 5% 200 nw 5% 100 nw 5% 200 nw connector connector connector connector connector uncertainty uncertainty uncertainty uncertainty (20 to 30 c) uncertainty multimode (characteristic) 10% 200 nw 5% 200 nw 10% 200 nw 5% 200 nw 5% 200 nw connector connector connector connector connector uncertainty uncertainty uncertainty uncertainty uncertainty 1. cw refers to an unmodulated optical signal. 2. options 102 and 104 do not include filters for 14.025 gb/s. options 142 and 144 include filters for 14.025 gb/s and no other rates. modules specifications (continued) 14 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet single-mode and multimode optical/electrical (continued) multiple and single-mode optical/electrical modules 86105c 86105d 86105d option 281 86115d option 002, 102, 142 1 86115d option 004, 104, 144 1 optical channel specifications (continued) user calibrated accuracy single-mode 3% 200 nw 2% 100 nw 3% 200 nw 2% 100 nw 2% 100 nw power meter power meter power meter power meter power meter uncertainty uncertainty uncertainty uncertainty uncertainty < 5 c change < 5 c change multimode (characteristic) 10% 200 nw 10% 200 nw 10% 200 nw 10% 200 nw 10% 200 nw power meter power meter power meter power meter power meter uncertainty uncertainty uncertainty uncertainty uncertainty < 5 c change maximum input power maximum non-destruct average 0.5 mw (C3 dbm) 5 mw (7 dbm) 5 mw (+7 dbm) 1310/1550 nm 5 mw (7 dbm) 5 mw (7 dbm) single mode: 5 mw (+8 dbm) 850 nm multimode: 3 mw (+5 dbm) maximum non-destruct peak 5 mw (+7 dbm) 10 mw (10 dbm) 5 mw (+10 dbm) 10 mw (10 dbm) 10 mw (10 dbm) fiber input 62.5/125 m 62.5/125 m 62.5/125 m 62.5/125 m 62.5/125 m user-selectable user-selectable user-selectable connector connector connector polarization dependent loss at 1550 nm 0.2 db (characteristic) input return loss (hms-10 connector fully filled fiber) 850 nm > 13 db 27 db single-mode > 24 db (1550 nm single mode) 27 db single-mode 27 db single-mode 1310 nm/1550 nm 14 db multimode > 24 db (1310 nm single mode) 14 db multimode 14 db multimode > 24 db > 13 db (850 nm multimode) 1. options 102 and 104 do not include filters for 14.025 gb/s. options 142 and 144 include filters for 14.025 gb/s and no other rates. modules specifications (continued) 15 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet single-mode and multimode optical/electrical (continued) multiple and single-mode optical/electrical modules 86105c 86105d 86105d option 281 86115d option 002, 102, 142 1 86115d option 004, 104, 144 1 electrical channel specifications electrical channel bandwidth 12.4 and 20 ghz 25 and 35 ghz 25 and 35 ghz transition time (10 to 90% calculated from tr = 0.35/bw) 28.2 ps (12.4 ghz) 14 ps (25 ghz) 12 ps (25 ghz) 17.5 ps (20 ghz) 10 ps (35 ghz) 7 ps (50 ghz) rms noise characteristic 0.25 mv (12.4 ghz) 0.25 mv (25 ghz) 0.25 mv (25 ghz) 0.5 mv (20 ghz) 0.5 mv (35 ghz) 0.6 mv (50 ghz) maximum 0.5 mv (12.4 ghz) 0.5 mv (25 ghz) 0.5 mv (25 ghz) 1 mv (20 ghz) 1 mv (35 ghz) 1 mv (50 ghz) scale factor (per division) minimum 1 mv/division maximum 100 mv/division dc accuracy (single marker) 0.4% of full scale 2 mv 1.5% of (reading-channel offset), 12.4 ghz 0.4% of full scale 2 mv 3% of (reading-channel offset), 20 ghz dc offset range (referenced to center of screen) 500 mv input dynamic range (relative to channel offset) 400 mv maximum input signal 2 v (+16 dbm) nominal impedance 50 ? reflections (for 30 ps rise time) 5% electrical input 3.5 mm (male) 2.4 mm (male) 1. options 102 and 104 do not include filters for 14.025 gb/s. options 142 and 144 include filters for 14.025 gb/s and no other rates. modules specifications (continued) 16 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet single-mode optical/electrical high bandwidth single-mode optical/electrical modules 86116c option 025 86116c option 041 optical channel specifications optical channel unfiltered bandwidth 45 ghz 65 ghz wavelength range 1300 to 1620 nm 3 calibrated wavelengths 1300 nm/1550 nm optical sensitivity 2 1310 nm C9 dbm (17 gb/s) C3 dbm (39.8/43.0 gb/s) C8 dbm (25.8 gb/s) C7 dbm (27.7 gb/s) 1550 nm C10 dbm (17 gb/s) C5 dbm (39.8/43.0 gb/s) C9 dbm (25.8 gb/s) C8 dbm (27.7 gb/s) transition time (10 to 90% calculated from tr = 0.48/bw optical) 7.4 ps (fwhm) 1 rms noise characteristic 1310 nm 13 w (17 gb/s) 54 w (39.8/43.0 gb/s) 17 w (25.8 gb/s) 75 w (55 ghz) 20 w (27.7 gb/s) 105 w (60 ghz) 60 w (40 ghz) 187 w (65 ghz) 1550 nm 10 w (17 gb/s) 36 w (39.8/43.0 gb/s) 12 w (25.87 gb/s) 50 w (55 ghz) 14 w (27.7 gb/s) 70 w (60 ghz) 40 w (40 ghz) 125 w (65 ghz) maximum 1310 nm 18 w (17 gb/s) 102 w (39.8/43.0 gb/s) 20 w (25.8 gb/s) 127 w (55 ghz) 30 w (27.7 gb/s) 225 w (60 ghz) 120 w (40 ghz) 300 w (65 ghz) 1550 nm 15 w (17 gb/s) 68 w (39.8/43.0 gb/s) 18 w (25.8 gb/s) 85 w (55 ghz) 21 w (27.7 gb/s) 150 w (60 ghz) 80 w (40 ghz) 200 w (65 ghz) 1. fwhm (full width half max) as measured from optical pulse with 700 fs fwhm, 5 mhz repetition rate and 10 mw peak power. 2. generally represents the power level where an ideal eye diagram will approach 0% mask margin due to noise of the oscilloscope. provides a non-specified figure of merit to compare sensitivities of various optical channels. 3. contact keysight for broader wavelength specifications. modules specifications (continued) 17 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet single-mode and multimode optical/electrical high bandwidth single-mode optical/electrical modules 86116c optical channel specifications (continued) scale factor minimum 200 w/division maximum 5 mw/division cw 1 accuracy (single marker, reference to average power monitor) 150 w 4% (reading-channel offset) cw offset range (referenced two divisions from screen button) +8 to C12mw average power monitor (specified operating range) C23 to +9 dbm factory calibrated accuracy 5% 100 nw connector uncertainty, 20 to 30 c user calibrated accuracy 2% 100 nw power meter uncertainty, < 5 c change maximum input power maximum non-destruct average 10 mw (+10 dbm) maximum non-destruct peak 50 mw (+17 dbm) fiber input 9/125 m, user-selectable connector input return loss (hms-10 connector fully filled fiber) 20 db electrical channel specifications electrical channel bandwidth 80 (93), 55 and 30 ghz transition time (10 to 90% calculated from tr = 0.35/bw) 6.4 ps (55 ghz) 4.4 ps (80 ghz) rms noise characteristic 0.5 mv (30 ghz) 0.6 mv (55 ghz) 1.1 mv (80 ghz) maximum 0.8 mv (30 ghz) 1.1 mv (55 ghz) 2.2 mv (80 ghz) scale factor (per division) minimum 2 mv/division maximum 100 mv/division dc accuracy (single marker) 0.4% of full scale 3 mv 2% of (reading-channel offset) 2% of offset (all bandwidths) dc offset range (referenced to center of screen) 500 mv input dynamic range (relative to channel offset) 400 mv maximum input signal 2 v (+16 dbm) nominal impedance 50 ? reflections (for 20 ps rise time) 10% (dc to 70 ghz) 20% (70 to 100 ghz) electrical input 1.85 mm (male) 1. cw refers to an unmodulated optical signal. modules specifications (continued) 18 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet dual electrical dual electrical channel modules 86112a 54754a electrical channel bandwidth 12.4 and 20 ghz (30 ghz 1 ) 12.4 and 18 ghz transition time (10 to 90% calculated from tr = 0.35/bw) 28.2 ps (12.4 ghz) 28.2 ps (12.4 ghz) 17.5 ps (20 ghz) 19.4 ps (18 ghz) rms noise characteristic 0.25 mv (12.4 ghz) 0.25 mv (12.4 ghz) 0.5 mv (20 ghz) 0.5 mv (18 ghz) maximum 0.5 mv (12.4 ghz) 0.5 mv (12.4 ghz) 1 mv (20 ghz) 1 mv (18 ghz) scale factor (per division) minimum 1 mv/division maximum 100 mv/division dc accuracy (single marker) 0.4% of full scale 0.4% of full scale 2 mv 1.5% of (reading-channel offset) 2 mv 0.6% of (reading-channel offset) (12.4 ghz) 0.4% of full scale (12.4 ghz) 0.4% of full scale or marker reading (whichever is greater) 2 mv 3% of (reading-channel offset) (20 ghz) 2 mv 1.2% of (reading-channel offset) (18 ghz) dc offset range (referenced from center of screen) 500 mv input dynamic range (relative to channel offset) 400 mv maximum input signal 2 v (+16 dbm) nominal impedance 50 ? reflections (for 30 ps rise time) 5% electrical input 3.5 mm (male) dual electrical channel modules 86118a electrical channel bandwidth 50 and 70 ghz transition time (10 to 90% calculated from tr = 0.35/bw) 11.7 ps (30 ghz) 7 ps (50 ghz) rms noise characteristic 0.7 mv (50 ghz) 1.3 mv (70 ghz) maximum 1.8 mv (50 ghz) 2.5 mv (70 ghz) scale factor (per division) minimum 1 mv/division maximum 100 mv/division dc accuracy (single marker) 0.4% of full scale 2 mv 2% of (reading-channel offset), (50 ghz) 0.4% of full scale 2 mv 4% of (reading-channel offset), (70 ghz) dc offset range (referenced from center of screen) 500 mv input dynamic range (relative to channel offset) 400 mv maximum input signal 2 v (+16 dbm) nominal impedance 50 ? reflections (for 30 ps rise time) 20% electrical input 1.85 mm (male) 1. a special option, 86112-hbw, extends the bandwidth from 20 to 30 ghz. all other specifications remain unchanged. modules specifications (continued) 19 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet dual electrical (continued) dual electrical channel modules 86108a 86108b-lbw 86108b-hbw bandwidth (low/high bw setting) 16 and > 32 ghz, (35 ghz) 20 and 35 ghz 35 and 50 ghz transition time (10 to 90% calculated from tr = 0.35/bw) 10 ps 10 ps 7 ps rms noise characteristic (low/high bw setting) 240 v/420 v 300 v/500 v 600 v/750 v maximum (low/high bw setting) 350 v/700 v 350 v/700 v 800 v/980 v scale factor (per division) minimum 2 mv/division 1 mv/division 1 mv/division maximum 100 mv/division 140 mv/division 140 mv/division dc accuracy (single marker) low bw setting 0.7% of full scale, 2 mv 1.5% of (reading-channel offset) (16 ghz) high bw setting 0.7% of full scale, 2 mv 3% of (reading-channel offset) (32 ghz) cw offset range (referenced from center of screen) 500 mv 700 mv 700 mv input dynamic range (relative to channel offset) 400 mv 560 mv 560 mv maximum input signal 2 v (+16 dbm) 2.5 v (+18 dbm) 2.5 v (+18 dbm) nominal impedance 50 ? 50 ? 50 ? reflections (for 30 ps rise time) 5% 5% 5% electrical input 3.5 mm 3.5 mm 2.4 mm ch1 to ch2 skew < 12 ps < 10 ps < 10 ps modules specifications (continued) 20 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet dual electrical (continued) clock recovery 86108a 86108b-216 86108b-232 data rate input range (continuous tuning) 0.05 to 14.2 gb/s (requires fw revision 8.1 or higher) 0.05 to 16 gb/s 0.05 to 32 gb/s clock frequency input range (continuous tuning) 0.025 to 6.75 ghz 0.025 to 8 ghz 0.025 to 16 ghz minimum input level to aquire lock 175 mv pp 175 mv pp 175 mv pp recovered clock random jitter (used as internal trigger) 1 internal recovered clock trigger < 500 fs at 2 gb/s < 350 fs at data rate < 2 gb/s < 350 fs at data rate < 2 gb/s < 400 fs at 5 and 10 gb/s < 300 fs at data rate 2 gb/s < 300 fs at data rate 2 gb/s clock recovery adjustable loop bandwidth range (user selectable) 0.015 to 10 mhz 0.015 to 20 mhz 0.015 to 20 mhz clock recovery loop peaking range up to 4 settings (dependent on loop bw) loop bandwidth accuracy 30% tracking range (includes spread spectrum tracking) 2500 ppm 0.25% aquisition range 5000 ppm maximum consecutive identical digits to lock 150 auto relocking if signal lock is lost, system can automatically attempt to regain phase-lock. user selectable to enable/disable residual spread spectrum C72 3 db at 33 khz C84 3 db at 33 khz C84 3 db at 33 khz front panel recovered clock amplitude 0.15 to 1.0 vpp (0.3 to 1.0 vpp) front panel recovered clock divide ratio (user selectable) 1, 2, 4, 8, 16 1, 2, 4, 8, 16 1, 2, 4, 8, 16 2, 4, 8, 16 2, 4, 8, 16 2, 4, 8, 16 recovered clock front panel connector type sma internal frequency counter accuracy 10 ppm 1. these values indicate performance with the internal precision timebase disabled. with precision timebase enabled, system jitter performance is dramatically decreased. see page 9. phase trimmers 86108b-pt3 (= qty 2 n1027a-pt3) 86108b-pt2 (= qty 2 n1027a-pt2) nominal impedance 50 ? 50 ? frequency range dc to 26 ghz dc to 50 ghz insertion loss (at f max) 0.8 db 0.8 db time delay 238 to 293 ps 172 to 195 ps connectors sma (m-f) 2.4 mm (m-f) modules specifications (continued) 21 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet dual/quad electrical dual/quad electrical channel modules n1045a 1 n1055a 1 channel options (number of channels; f = female; m = male) 02f/02m 04f/04m 32f/32m 34f/34m 52f/52m 54f/54m number of channels 2 2 4 2 4 2 4 electrical channel bandwidth 20/35/45/60 ghz 35 ghz 4, 5 35 ghz 4, 5 35/50 ghz 5 35/50 ghz 5 transition time (characteristic) (10 to 90% calculated from tr = 0.35/bw) 17.5/10/7.8/5.8 ps 10 ps 10 /7 ps channel-to-channel skew range 100 ps 150 ps rms noise characteristic 275/425/500/750 v 600 v 600/750 v maximum 950 v (60 ghz) 730 v 950 v scale factor (per division) minimum 1 mv/division 1 mv/division maximum 100 mv/division 100 mv/division dc accuracy (single marker) 2 mv 4% of (reading-channel offset), (60 ghz) 2 mv 4% of (reading-channel offset), (50 ghz) dc offset range (referenced from center of screen) 500 mv 500 mv input dynamic range (relative to channel offset) 400 mv 400 mv maximum input signal 2 v (+16 dbm) +2 v/C1 v nominal impedance 50 ? 50 ? reflections (for 30 ps rise time) 20% 20% electrical input 3 1.85 mm (female or male option) 2.92 mm (female or male option) 1.85 mm (female or male option) tdr system tdr system (mainframe with 54754a module) oscilloscope/tdr performance normalized characteristics rise time 40 ps nominal adjustable from larger of 17 ps or 0.08 x time/div < 25 ps normalized maximum: 5 x time/div tdr step flatness 1% after 1 ns from edge 0.1% + 5%, C3% < 1 ns from edge low level 0.00 v 2 mv high level 200 mv +2 mv tdr system (mainframe with n1055a module) n1055a - 3xx (35 ghz bandwidth) n1055a - 5xx (50 ghz bandwidth) without tdr calibration with tdr calibration without tdr calibration with tdr calibration step rise/fall time (transmitted 6 ) < 18 ps adjustable from 15 ps, characteristic < 7 ps adjustable from 6 ps, characteristic 1. module is supported by 86100d dca-x mainframe and later. 2. upgradable from two channel to four channel after purchase (return to keysight). 3. connector style is the same on all channels and is selected at time of order. 4. upgradable from 35 to 50 ghz after purchase (return to keysight). 5. tuned to be C3 db ( measurement uncertainty) at stated bandwidth(s) using nist traceable swept-sine test system. 6. defined as the transition time at the output of the remote head. it is calculated by deconvolving the receiver transition time from the measured transition time when the remote head is terminated with a short. measured on a negative tdr step. modules specifications (continued) 22 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet modules specifications (continued) specifications describe warranted performance while characteristics provide useful, nonwarranted information and performance. characteristics are listed below in italics. multiple electrical channel modules n1046a channel options 71f/72f/74f 81f/82f/84f 11f/12f/14f number of channels 1/2/4 1/2/4 1/2/4 electrical channel bandwidth (maximum) 1 75 ghz 85 ghz 100 ghz electrical channel bandwidth settings (user-selectable) 45, 60, 75 ghz 45, 60, 75, 85 ghz 45, 50, 75, 85, 100, 122 ghz ( characteristic ) transmision time (10 to 90% calculated from tr = 0.35/bandwidth) 7.8, 5.9, 4.7 ps 7.8, 5.9, 4.7, 4.2 ps 7.8, 5.9, 4.7, 4.2, 3.5, < 3.2 ps channel-to-channel skew range 100 ps 100 ps 100 ps rms noise characteristic 400, 580, 740 v 400, 580, 740, 860 v 400, 580, 740, 860, 1005, 2000 v maximum 550, 700, 950 v 550, 700, 950, 1150 v 550, 700, 950, 1150, 1350, 2000 ( characteristic ) v scale factor (per division) C minimum 1 mv/division 1 mv/division 1 mv/division C maximum 100 mv/division 100 mv/division 100 mv/division dc accuracy (v avg measurement) C specified at calibration tempera - ture 0.5 c. (perform a new module calibration if hardware skew has been applied.) 2 mv ( characteristic ) C specified at calibration tempera - ture 5 c 2 mv 4% of (reading C channel offset) dc offset range (referenced from center of screen) 500 mv 500 mv 500 mv input dynamic range (relative to channel offset) 400 mv 400 mv 400 mv maximum input signal 2v (+16 dbm) 2v (+16 dbm) 2v (+16 dbm) nominal impedance ( characteristic ) 50 ? 50 ? 50 ? how does keysight test and setup your module? the n1046a bandwidth is tested using a very fast electrical impulse that is generated by a photodiode driven by a femtosecond optical impulse source. the high bandwidth photodiode is calibrated and nist traceable through 110 ghz. for frequencies beyond 110 ghz, photodiode performance is based on a linear extrapolation of the photodiode response through 110 ghz but test data beyond 110 ghz is not provided. user note: for customers needing the maximum possible bandwidth, the 122 ghz setting is recommended. for customers needing high band - width with matched performance across channels, the 100 ghz setting is recommended. 1. tuned to be 3 db ( measurement uncertainty) at stated bandwidth(s) except for the 122 ghz setting which is tuned for maximum bandwidth while nhhslqjfkdqqhoqrlvhp9506 23 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet modules specifications (continued) clock recovery the dca platform offers clock recovery capability in the form of standalone clock recovery solutions such as the n1076/n1077a. for more information on standalone clock recovery solutions, please download the electrical and optical clock data recovery solutions datasheet which covers the n1076, n1077 and n1078 solutions. it is available from www.keysight.com/find/n1077a typical system configurations 1. contact your local keysight sales representative to help configure a system for your specific application. dc a plug-in modules (for typical 1 applications) t rigger options (select one only): str ? standar d ? for basic ey e measur ements onl y etr ? enhanced ? for pattern wav eforms, jitter analysis and some tdr applications ptb ? integrated pr ecision timebase for low r esidual jitte r remote connection options (select one only): gpi ? gpib car d interface installed gpn ? no gpib car d 86100d har dwar e options 061/062 ? add matlab analysis package 200 ? enhanced jitter analysis 201 ? advanced wav eform analysis 202 ? enhanced impedance and s-parameters 300 ? advanced amplitude analysis/rin/q-scale 500 ? pr oductivit y package sim ? infiniisim-dca de-embedding/embedding 86100du ? 400 pll and jitter spectrum analysis 86100d ? 401 advanced ey e analysis (jitter on prbs31 ) 86100d softwar e options (select any) : 86100d infiniium dca-x mainfr ame optical 20, 40 gb/s 86105d-281 34 ghz optical channel (780 to 1630 nm) 86116c 65 ghz optical channel 80 ghz electrical channel 86107a (#40) or 86100d-ptb precision timebase optical 1 to 12gb/s 86105c 9 ghz optical channel 20 ghz electrical channel electrical/pll 1 to 12 gb/s 86112a dual channels bw > 20 ghz each 83496b electrical clock recovery (#100, 200, 300) electrical/pll 1 to 16/32 gb/s (high performance) 86108b dual channels bw > 35/50 ghz with integrated precision timebase & clock recovery electrical 20, 40 gb/s (high performance) 86118a dual remote heads bw > 70 ghz each 86107a or 86100d-ptb precision timebase (#40) tdr/tdt single-ended, differential 54754a dual 18 ghz channels n1055a 2 or 4 channels 35 or 50 ghz channels note - tdr/tdt modules also perform as electrical-only receivers 24 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet software applications 86100d-200 enhanced jitter analysis option 200 provides extensive and accurate jitter decomposition, which is increasingly important as data rates increase and margins reduce. quickly customize your view of many parameters and take advantage of advanced features such as jitter spectrum analysis. 86100d-201 advanced waveform analysis take advantage of powerful features in option 201 to generate much deeper waveform files, integrate matlab analysis, and use equalizers (ctle, lfe, dfe), user operators and user defined measurements. 86100d-202 enhanced impedance and s-parameter option 202 works in tdr mode and provides live s-parameter responses, including magnitude (return loss, insertion loss, etc.), phase and group delay. single-ended, differential and mixed- mode responses are available simultaneously. also enables quick and easy saving of measurement results in touchstone files (.s2p, .s4p, etc.). 86100d-300 amplitude analysis/rin/q-factor extend the many capabilities from jitter mode into the amplitude domain and see the decomposition of the amplitude into several factors. option 300 also reports relative intensity noise (rin) and q-factor. 86100d-400 pll and jitter spectrum option 400 quickly characterizes key parameters of phase-locked loops and provides the jitter spectrum of your signal including spread spectrum clocks. control of the jitter source and receiver is integrated to ensure fast results. 86100d-401 advanced eye analysis for device testing with long patterns and to obtain ber-contour mask testing, option 401 integrates with the classic or flexdca interfaces to decompose the jitter and amplitude interference measurements into the key parameters. when using the embedded capability within flexdca or the included automation application, you may characterize jitter on simultaneous multiple lanes and obtain concise and visual results. 86100d-9fp pam-n analysis software accurately and quickly analyze pulse amplitude modulation (pam) signals as described in ieee 802.3bj clause 94 and developing standards such as oif-cei-56g and ieee 400g. 86100d-tfp ieee tdecq analysis software a lower cost subset of option 9fp capabilities that targets optical transmitter production test applications 86100d-sim infiniisim-dca at higher data rates, the effect of measurement fixtures and channels is prominent and can be accounted for through the de-embedding capabilities within option sim. you may also view measurements on live and simulated signals, allowing you to compare design intent to actual performance. n1012a oif cei compliance and debug application the n1012a application lets you fully characterize the ~120 trans - mitter test parameters (including 28g-vsr), reducing your test time from hours to minutes. included are return loss tests and several utilities to improve your test productivity. debug mode enables you to characterize your devices well beyond the parameters prescribed in the implementation agreements. N1014A sff-8431 compliance and debug application the N1014A application lets you fully characterize ~70 test parameters including all transmitter tests for host, module and host copper and all test signals for receiver testing. return loss tests and utilities are also included. n1019a user-defined application you may create your own test application or suite of tests using the dca-x and other instruments. quickly and intuitively create groups of tests, test descriptions, user prompts and test limits. use concise html reports to share your multiple test results with your users. n1081-4a ieee802.3 ethernet applications the extensive requirements for ieee802.3-2012, 802.3bj and 802.3bm are covered in these four applications, which comprise > 400 tests. characterize your device for one, four or ten lanes, and analyze trends over time/temperature and between devices. n1085a pam4 ethernet and oif-cei measurement application the n1085a software application covers pam-4 transmitter measurements outlined in ieee p802.3bs and four oif-cei-4.0 (56g) clauses. 86100d-bfp automatic fixture removal (afr) when measuring physical layer devices with non-coaxial interfaces, test fixtures or probes are often used to connect the device under test (dut) to the measurement equipment. for accurate measure - ments of the dut, the fixtures or probes need to be characterized and their effects removed from the composite measurement of the dut plus test fixture or probe combination. this option adds the automatic fixture removal (afr) capability from keysights powerful n1930b physical layer test system (plts) software to help you characterize a fixture or probe with non-coaxial interfaces. fixtures and probes to be characterized can be single-ended or differential. 25 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet measurements the 86100d dca-x features two user interfaces for optimum ease-of-use. it includes the classic dca interface for complete backwards compatibility with earlier dca mainframes. it also includes the new flexdca interface that provides new measure - ments and powerful analysis capability in a fully customizable application. the following measurements are available from the tool bar, as well as the pull down menus. the available measurements depend on the dca-x operating mode. oscilloscope mode C time rise time, fall time, jitter rms, jitter p-p, period, frequency, + pulse width, C pulse wwidth, duty cycle, delta time, [tmax, tmin, tedgeremote commands only] C amplitude overshoot, average power, v amptd, v p-p, v rms, v top, v base, v max, v min, v avg, oma (optical modulation amplitude) eye/mask mode C nrz eye measurements extinction ratio, jitter rms, jitter p-p, average power, crossing percentage, rise time, fall time, one level, zero level, eye height, eye width, signal to noise, duty cycle distortion, bit rate, eye amplitude C rz eye measurements extinction ratio, jitter rms, jitter p-p, average power, rise time, fall time, one level, zero level, eye height, eye amplitude, opening factor, eye width, pulse width, signal to noise, duty cycle, bit rate, contrast ratio mask test C open mask, start mask test, exit mask test, filter, mask test margins, mask margin to a hit ratio, mask test scaling, create nrz mask option 200 enhanced jitter analysis software C measurements total jitter (tj), random jitter (rj), deterministic jitter (dj), periodic jitter (pj), data dependent jitter (ddj), duty cycle distortion (dcd), intersymbol interference (isi), sub-rate jitter (srj), asynchronous periodic jitter frequencies, subrate jitter components C flexdca adds the following measurements: data dependent pulse width shrinkage (ddpws), uncorrelated jitter (uj), j2, j9 C data displays tj histogram, rj/pj histogram, ddj histogram, composite histogram, ddj versus bit position, bathtub curve (log or q scale) option 201 advanced waveform analysis C measurements deep memory pattern waveform, user-defned measurements through matlab interface C data displays equalized waveform option 202 enhanced impedance and s-parameters C markers and delta markers on live frequency domain responses such as s-parameter magnitude, phase and group delay option 300 amplitude analysis/rin/q-factor (requires option 200) C measurements total interference (ti), deterministic interference (dual-dirac model, di), random noise (rn), periodic interference (pi), and inter-symbol interference (isi), rin (dbm or db/hz), q-factor C data displays ti histogram, rn/pi histogram, isi histogram option 400 pll and jitter spectrum measurement software C jitter spectrum/phase noise measurements integrated jitter: total jitter (tj), random jitter (rj), deterministic jitter (dj); dj amplitude/frequency, jitter spectrum graph, jitter versus time graph, frequency versus time graph, jitter histogram, post processed jitter measurements, phase noise graph dbc/hz versus frequency C phase locked loop (pll) measurements pll bandwidth, pll peaking, data rate, jitter transfer function (jtf) graph, observed jitter transfer (ojtf) graph, jtf model. option 401 advanced eye analysis C * jitter analysis on long patterns flexdca version: total jitter (tj), deterministic jitter (dj), random jitter (rj), j2, j5, j9. jitter can be measured on long patterns such as prbs23, prbs31, live traffic. microsoft excel version: all of the above, plus ber contour mask testing. 26 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet option 500 productivity package including tdec option 500 enables rapid eye acquisition and tdec (transmitter dispersion and eye closure) measurements. rapid eye achieves two significant benefits. first, unlike conventional sampling and data display, when an eye mask test is performed, every acquired sample will be compared to the mask, as the central eye is composed of all acquired samples. effective throughput is improved at least 60%. second, incomplete eye diagram displays that can occur when triggering at sub-rates are eliminated. tdec is a complex eye diagram measurement required for new high data rate standards deployed over multimode fiber. it is easily and quickly achieved with the automated tdec measurement. (ieee 802.3bm and t11 fc-pi-6p require a specific tdec channel bandwidth, achieved with 86105d/86115d-option 168.) option 401 advanced eye analysis C jitter measurements total jitter (tj), random jitter (rj), deterministic jitter (dj), j2 jitter (j2), j5 jitter (j5), j9 jitter (j9) C amplitude measurements total interference (ti), random noise (rn), deterministic interference (di), eye opening C mask test pass/fail status, ber limit option sim infiniisim-dca 2-port de-embedding and embedding; 4-port de-embedding and embedding; add simulated random jitter and noise option 9fp pam-n analysis software C electrical and optical signals C eye width, eye height, eye skew C level amplitude, level noise, level skew C linearity measurements C tdecq, outer oma, outer er option tfp ieee tdefcq analysis software C tdecq, outer oma, outer er tdr/tdt mode (requires tdr module) some also usable within measurement regions: prior to average add: C time domain responses available in volts, percent reflection and ohms (where applicable) C x-axis in time or distance C average C min C max C amplitude at time C excess capacitance C excess inductance C rise time C fall time C delta time measurements (continued) C time at max C time at min C time at amplitude C limit lines C time at edge additional capabilities standard functions C standard functions are available through pull down menus and soft keys, and some functions are also accessible through the front panel knobs. markers C two vertical and two horizontal (user-selectable) limit tests C acquisition limits C limit test run until conditions off, # of waveforms, # of samples C report action on completion save waveform to memory, save screen image C measurement limit test C specify number of failures to stop limit test C when to fail selected measurement inside limits, outside limits, always fail, never fail C report action on failure save waveform to memory, save screen image, save summary C mask limit test C specify number of failed mask test samples C report action on failure save waveform to memory, save screen image, save summary limit lines C with the limit line editor, you can modify an existing limit line or create a new limit line from a current waveform or manual data entry. C limit lines are displayed boundaries used for pass/fail testing in oscilloscope and tdr/tdt instrument modes, and they are similar to masks in eye/mask mode. C any data point that occurs above an upper limit line or below a lower limit line causes a failed condition. a failed portion of a waveform that is beyond the limit line boundary is displayed in red. waveform autoscaling autoscaling provides quick horizontal and vertical scaling of both pulse and eye-diagram (rz and nrz) waveforms. gated triggering trigger gating port allows easy external control of data acquisition for circulating loop or burst-data experiments. use ttl-compatible signals to control when the instrument does and does not acquire data. 27 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet configure measurements C thresholds C 10%, 50%, 90% or 20%, 50%, 80% or custom C eye boundaries C define boundaries for eye measurements C define boundaries for alignment C format units for C duty cycle distortion time or percentage C extinction/contrast ratio ratio, decibel or percentage C eye height amplitude or decibel (db) C eye width time or ratio C average power watts or decibels (dbm) C top base definition automatic or custom C time definition C first edge number, edge direction, threshold C second edge number, edge direction, threshold C jitter mode C units (time or unit interval, watts, volts, or unit amplitude) C signal type (data or clock) C measure based on edges (all, rising only, falling only) C graph layout (single, split, quad) quick measure configuration when using the classic dca interface, quick measure measure - ments are initiated by pressing the 28 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet easier calibrations calibrating your instrument has been simplified by placing all the performance level indicators and calibration procedures in a single high-level location. this provides greater confidence in the measurements made and saves time in maintaining equipment. stimulus response testing using the keysight technologies, inc. n490x, m8000 series berts error performance analysis represents an essential part of digital transmission test products. together, the keysight 86100d and bert products create a powerful test solution. if stimulus only is needed, the 81133a and 81134a pattern generators work seamlessly with the 86100d. transitioning from the keysight 83480a and 86100a/b/c to the 86100d while the 86100d has powerful new functionality that its predecessors dont have, it has been designed to maintain compatibility with the keysight 86100a, 86100b, 86100c and keysight 83480a digital communications analyzers and keysight 54750a wide-bandwidth oscilloscope. all modules used in the keysight 86100a/b/c, 83480a and 54750a can also be used in the 86100d. since the 86100d includes the classic dca interface, the remote programming command set for the 86100d designed for the 86100a/b/c will work directly. some code modifications are required when transitioning from the 83480a and 54750a, but the command set is designed to minimize the level of effort required. ivi-com capability interchangeable virtual instruments (ivi) is a group of new instrument device software specifications created by the ivi foundation to simplify interchangeability, increase application performance, and reduce the cost of test program development and maintenance through design code reuse. the 86100d ivi-com drivers are available for download from the keysight website. vxii.2 and vxii.3 instrument control the 86100d dca-x provides lan based instrument control. measurements (continued) 29 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet 86100d infiniium dca-x mainframe 86100d hardware options 86100d-str standard trigger 86100d-etr enhanced trigger 86100du-etr enhanced trigger upgrade kit 86100d-ptb precision timebase integrated in the mainframe 86100du-ptb upgrade mainframe with integrated precision timebase 86100d-gpi gpib card interface installed (default) 86100d-gpn no gpib card interface 86100d-090 removable hard drive 86100d-092 internal hard drive (default) 86100d software options 86100d-xxx are permanent fixed-node licenses installed by the factory 86100du-xxx are permanent fixed-node licenses installed by the customer (software upgrades) 86100dt-xxx are permanent transportable licenses installed by the customer the -xxx option code provides the same functionality independent of the prefix (i.e., 86100d or 86100du or 86100dt) 86100d-bfp automatic fixture removal 86100d-061 matlab - basic oscilloscope package 86100d-062 matlab - standard oscilloscope package 86100d-200 enhanced jitter analysis software 86100d-201 advanced waveform analysis software 86100d-202 enhanced impedance and s-parameter software 86100d-300 amplitude analysis/rin/q-factor 86100du-400 pll and jitter spectrum software 1 86100d-401 advanced eye analysis software 1 86100d-sim infiniisim-dca software 86100d-500 productivity package software 86100d-9fp pam-n analysis software, fixed perpetual license n1012a oif cei compliance and debug application N1014A sff-8431 compliance and debug application n1019a user-defined application n1081a ieee 802.3 kr/kr4 application n1082a ieee 802.3bj xlaui, caui-10 and nppi; ieee 802.3bm caui-4 (option -4tp) n1083a ieee 802.3 40gbase-cr4 and 100gbase-cr10 n1084a ieee802.3 kr4/cr4 application n1085a pam4 measurement application for ethernet and oif-cei ieee measurements option 1tp oif-cei measurements option 4tp misc options 86100d-afp module slot filler panel 86100d-a x4 rack mount flange kit 86100d-a xe rack mount flange kit with handles 86100d-uk6 commercial cal certificate with test data 86100du-wn7 upgrade to windows 7 operating system note: C option bfp requires option 202. C for complete pam4 analysis capability, option 9fp requires options 200/201/300/401. C options 200, 201, and sim require option etr (enhanced trigger). C option 300 requires options 200 and etr. C option 400 requires microsoft office excel 2007/2010. optical/electrical modules 86105c 9 ghz optical channel; single-mode and multimode, amplified (750 to 1650 nm) 20 ghz electrical channel 86105c-100 155 mb/s through 8.5 gb/s (choose 4 filter rates from options 86105c-110 through 86105c-195) 86105c-110 155 mb/s 86105c-120 622 mb/s (also covers 614 mb/s) 86105c-130 1.063 gb/s 86105c-140 1.244/1.250 gb/s (also covers 1.229 mb/s) 86105c-150 2.125 gb/s 86105c-160 2.488/2.500 gb/s (also covers 2.458 gb/s) 86105c-170 2.666 gb/s 86105c-180 3.125 gb/s (also covers 3.072 gb/s) 86105c-190 4.250 gb/s 86105c-193 5.0 gb/s 86105c-195 6.250 gb/s (also covers 6.144 gb/s) 86105c-200 8.5, 9.953, 10.3125, 10.519, 10.664, 10.709, 11.096, 11.317 gb/s 86105c-300 combination of rates available in 86105c-100 and 86105c-200 86105d 2 20 ghz optical channel; single-mode and multimode, (750 to 1650 nm); filters for 8.5, 9.953, 10.3125, 10.519, 10.664, 10.709, 11.096, 11.317, 14.025 gb/s; 35 ghz electrical channel 86105d-100 identical capability as 86105d, 14.025 gb/s filter not included 86105d-200 identical capability as 86105d, only filter provided is 14.025 gb/s 86105d-irc 3 system impulse response correction calibration 86105d-281 34 ghz optical channel, filters for 15, 25.78 , 27.95, 28.05 gb/s (contact keysight for additional 14.025 gb/s filter) 4 . 50 ghz electrical channel 1. fixed node customer installed or transportable customer installed (86100du or 86100dt). not available as a factory-installed license. 2. this module is not compatible with the 86100a and 86100b dca mainframes. if you want to upgrade older dcas, contact keysight technologies to discuss current trade-in deals. 3. system impulse response correction calibration provides a unique calibration file for the optical channel(s). the flexdca user interface uses this calibration file to create ideal reference receiver responses for more accurate and consistent transceiver compliance testing. irc also allows reference receivers to be defined at any data rate within 50% of the hardware response. this allows optical receivers to significantly extend their operating range. 4. a 15 gb/s filter is provided with option 281 and 282 that closely approximates the response required for 16x fibre channel compliance testing. contact keysight for a special option that verifies compliance of the 86105d-281 and 86115d-282 to the 16x fibre channel reference receiver specification. ordering information 30 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet optical/electrical modules (continued) 86115d 2 20 ghz multi-optical port plug-in module; single-mode and multimode (750 to 1650 nm); filters for 8.5, 9.953, 10.3125, 10.519, 10.664, 10.709, 11.096, 11.317, 14.025 gb/s 86115d-002 two optical channels with filters for all rates listed (8.5 to 14.025 gb/s) 86115d-102 identical capability as 86115d-002, 14.025 gb/s filters not included 86115d-142 identical capability as 86115d-002, only filters provided are 14.025 gb/s 86115d-282 two optical channels with filters for 15, 25.78, 27.95, 28.05 gb/s (contact keysight for 14.025 gb/s filter) 4 86115d-004 four optical ports with filters for all rates listed (8.5 to 14.025 gb/s) mulitplexed to two optical channels through 2 integral 1x2 optical switches 86115d-10 4 identical capability as 86115d-004, 14.025 gb/s filters not included 86115d-14 4 identical capability as 86115d-004, only filters provided are 14.025 gb/s 86115d-irc system impulse response correction calibration 86116c 1, 2 40 to 65 ghz optical/80 ghz electrical sampling module, 1300 to 1620 nm 86116c-irc 3 system impulse response correction calibration this module is not compatible with the 86100a and 86100b dca mainframes. if you want to upgrade older dcas, contact keysight technologies to discuss current trade-in deals. all optical modules have fc/pc connectors installed on each optical port. other connector adapters available as options are: diamond hms-10, din, st and sc. select exactly one reference receiver option: 86116c-025 40 ghz optical/80 ghz electrical channels, 17.0/25.8/27.7 gb/s reference receiver 86116c-041 65 ghz optical/80 ghz electrical channels, 39.81/41.25/43.02 gb/s reference receiver dual/quad electrical channel modules 86112a dual 20 ghz electrical channels 86112a-hbw dual 30 ghz electrical channels 86118a dual 70 ghz electrical remote sampling channels 86118a-h01 differential de-skew n1045a 2 2/4 port 60 ghz electrical remote head n1045a-02f 2 channel remote head, 1.85 mm, female n1045a-02m 2 channel remote head, 1.85 mm, male n1045a-04f 4 channel remote head, 1.85 mm, female n1045a-04m 4 channel remote head, 1.85 mm, male n1046a 100 ghz, 1/2/4 port electrical remote sampling head n1046a-71f 1 channel, 75 ghz remote head, 1 mm, female n1046a-81f 1 channel, 85 ghz remote head, 1 mm, female n10 46a-11f 1 channel, 100 ghz remote head, 1 mm, female n1046a-72f 2 channel, 75 ghz remote head, 1 mm, female n1046a-82f 2 channel, 85 ghz remote head, 1 mm, female n10 46a-12f 2 channel, 100 ghz remote head, 1 mm, female n1046a-74f 4 channel, 75 ghz remote head, 1 mm, female n1046a-84f 4 channel, 85 ghz remote head, 1 mm, female n10 46a-14f 4 channel, 100 ghz remote head, 1 mm, female tdr/tdt modules 54754a 1, 5 differential tdr module with dual 18 ghz tdr/electrical channels n1055a 1, 2 35/50 ghz, 2/4 port, tdr/tdt remote head n1055a-fs1 fast sampling, mandatory option n1055a-32f 35 ghz, 2 channel remote head, 2.92 mm, female n1055a-32m 35 ghz, 2 channel remote head, 2.92 mm, male n1055a-34f 35 ghz, 4 channel remote head, 2.92 mm, female n1055a-34m 35 ghz, 4 channel remote head, 2.92 mm, male n1055a-52f 50 ghz, 2 channel remote head, 1.85 mm, female n1055a-52m 50 ghz, 2 channel remote head, 1.85 mm, male n1055a-54f 50 ghz, 4 channel remote head, 1.85 mm, female n1055a-54m 50 ghz, 4 channel remote head, 1.85 mm, male n1055a-fs1 fast sampling 1. 86100d-etr is recommended when; a. more than 1 tdr module is connected to the same dut. b. using a dca module equipped with a rear-panel trigger circuit. examples include 54754a, 83496x, and 86108a/b modules. if operating these modules in an 86100d with option str, an external cable (such as p/n 5062-6690) must be connected from the modules front panel trigger/clock output to the 86100ds trigger input. 2. requires 86100d mainframe (not compatible with 86100a/b/c). 3. this module is not compatible with the 86100a and 86100b dca mainframes. if you want to upgrade older dcas, contact keysight technologies to discuss current trade-in deals. 4. supports both dca-x and dca-m platforms. for detailed n1076a/n1077a specifications, refer to the data sheet located at www.keysight.com/find/n1077a . standalone clock recovery instruments are controlled via a usb connection to an 86100d dca-x mainframe or a user-supplied pc running n1010a flexdca software. 5. included with each of these tdr modules is a tdr trigger cable, two 50 ? sma terminations and one sma short. ordering information (continued) 31 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet external clock recovery solutions 4 n1076a electrical clock recovery n1076a-216 clock recovery range: 50 mbd to 16 gbd n1076a-232 clock recovery range: 50 mbd to 32 gbd n1076a-jsa jitter spectrum analysis n1076b electrical clock recovery n1076b-216 clock recovery range: 125 mbd to 16 gbd n1076b-232 clock recovery range: 125 mbd to 32 gbd n1076b-264 clock recovery range: 125 mbd to 64 gbd (56 gbd for pam4 signals) n1076b-eva integrated variable equalizers (mandatory option) n1076b-jsa jitter spectrum analysis n1077a optical/electrical clock recovery n1077a-216 clock recovery range: 50 mbd to 16 gbd n1077a-232 clock recovery range: 50 mbd to 32 gbd n1077a-sms internal sm and mm splitters n1077a-sx t no splitter (supplied by user) n1077a-jsa jitter spectrum analysis n1078a optical/electrical clock recovery n1078a-216 clock recovery range: 125 mbd to 16 gbd n1078a-232 clock recovery range: 125 mbd to 32 gbd n1078a-264 clock recovery range: 125 mbd to 64 gbd n1078a-s50 internal 50-50 sm optical splitter n1078a-sxt no splitter (splitter supplied by user) n1078a-jsa jitter spectrum analysis n1078a-eva integrated variable equalizers in electrical input path (mandatory option) precision waveform analyzer module 1, 3 dual electrical channel module with integrated clock recovery and precision timebase. 86108a-100 dual 32 ghz electrical channels, integrated clock recovery (50 mb/s to 14.2 gb/s) with integrated precision timebase 86108a-001 two 3.5 mm phase trimmers for skew adjustment 86108a-002 two precision 3.5 mm 18 inch cables 86108a-400 auxiliary clock recovery input 86108b options 86108b-lbw dual 35 ghz electrical channels 86108b-hbw dual 50 ghz electrical channels 86108b-216 clock recovery 50 mb/s to 16 gb/s 86108b-232 clock recovery 50 mb/s to 32 gb/s 86108b-300 adjustable loop bandwidth/peaking 86108b-400 auxiliary clock recovery input 86108b-ptb integrated precision timebase 86108b-jsa jitter spectrum analysis and software clock recovery emulation 86108b-a23 two adapters, 2.4 mm (f) to 3.5 mm (f) 86108b-ca2 matched cable pair, 2.4 to 2.4 mm, 24 inch 86108b-ca3 matched cable pair, 3.5 to 3.5 mm, 18 inch 86108b-dc2 two dc blocks, 2.4 mm, 16 v, 50 khz to 50 ghz 86108b-dc3 two dc blocks, 3.5 mm, 16 v, 50 khz to 26.5 ghz 86108b-pt2 two 2.4 mm phase trimmers for ext. skew adjustment phase trimmers nominal impedance frequency range insertion loss (at f max) time delay connectors 86108b-pt3 two 3.5 mm phase trimmers for ext. skew adjustment phase trimmers nominal impedance frequency range insertion loss (at f max) time delay connectors 1. 86100d-etr is recommended when; a. more than 1 tdr module is connected to the same dut. b. using a dca module equipped with a rear-panel trigger circuit. examples include 54754a, 83496x, and 86108a/b modules. if operating these modules in an 86100d with option str, an external cable (such as p/n 5062-6690) must be connected from the modules front panel trigger/clock output to the 86100ds trigger input. 2. requires 86100d mainframe (not compatible with 86100a/b/c). 3. this module is not compatible with the 86100a and 86100b dca mainframes. if you want to upgrade older dcas, contact keysight technologies to discuss current trade-in deals. 4. supports both dca-x and dca-m platforms. for detailed n1076a/n1077a specifications, refer to the data sheet located at www.keysight.com/find/n1077a . standalone clock recovery instruments are controlled via a usb connection to an 86100d dca-x mainframe or a user-supplied pc running n1010a flexdca software. 5. included with each of these tdr modules is a tdr trigger cable, two 50 ? sma terminations and one sma short. ordering information (continued) 32 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet warranty options (for all products) r1280a customer return repair service r1282a customer return calibration service accessories see the "dca accessories" guide for available accessories ordering information (continued) connectivity solutions for a wide range of test adapters to connect to one or more lanes for sfp+, qsfp+, fibre channel, pcie and many others, please see adapters information from wilder technologies at: http://www.wilder-tech.com / call keysight for connectivity and probing solutions not listed above. firmware and software firmware and software upgrades are available through the web or your local sales office. www.keysight.com/find/dcax n1010a flexdca remote access software flexdca pro runs on the 86100d as well as on a pc or laptop. software licenses allow connec - tivity to an 86100c or d mainframe, advanced analysis or productivity packages, and more. http://www.keysight.com/find/flexdca_download flexdca express is the same as flexdca pro except that it does not included any functionality requiring a license. it is available free of charge from http://www.keysight.com/find/flexdca_express 86100d dca-x brochure for more information on the features and benefits of the 86100d dca-x and dca modules, download the 86100d dca-x brochure. go to: www.keysight.com and search on 5989-5822en. 33 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet keysight oscilloscopes multiple form factors from 20 mhz to > 90 ghz | industry leading specs | powerful applications 34 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet www.axiestandard.org advancedtca ? extensions for instrumentation and test (axie) is an open standard that extends the advancedtca for general purpose and semiconductor test. the business that became keysight was a founding member of the axie consortium. atca ? , advancedtca ? , and the atca logo are registered us trademarks of the pci industrial computer manufacturers group. www.lxistandard.org lan extensions for instruments puts the power of ethernet and the web inside your test systems. the business that became keysight was a founding member of the lxi consortium. www.pxisa.org pci extensions for instrumentation (pxi) modular instrumentation delivers a rugged, pc-based high-performance measurement and automation system. learn more at www.keysight.com/find/software start with a 30-day free trial. www.keysight.com/find/free_trials download your next insight keysight software is downloadable expertise. from first simulation through first customer shipment, we deliver the tools your team needs to accelerate from data to information to actionable insight. C electronic design automation (eda) software C application software C programming environments C productivity software 35 | keysight | infiniium dca-x 86100d wide-bandwidth oscilloscope mainframe and modules - data sheet mykeysight www.keysight.com/find/mykeysight a personalized view into the information most relevant to you. http://www.keysight.com/find/emt_product_registration register your products to get up-to-date product information and find warranty information. keysight services www.keysight.com/find/service keysight services can help from acquisition to renewal across your instruments lifecycle. our comprehensive service offeringsone- stop calibration, repair, asset management, technology refresh, consulting, training and morehelps you improve product quality and lower costs. keysight assurance plans www.keysight.com/find/assuranceplans up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. keysight channel partners www.keysight.com/find/channelpartners get the best of both worlds: keysights measurement expertise and product breadth, combined with channel partner convenience. this information is subject to change without notice. ? keysight technologies, 2018 published in usa, february 28, 2018 5990-5824en www.keysight.com for more information on keysight technologies products, applications or services, please contact your local keysight office. the complete list is available at: www.keysight.com/find/contactus americas canada (877) 894 4414 brazil 55 11 3351 7010 mexico 001 800 254 2440 united states (800) 829 4444 asia pacific australia 1 800 629 485 china 800 810 0189 hong kong 800 938 693 india 1 800 11 2626 japan 0120 (421) 345 korea 080 769 0800 malaysia 1 800 888 848 singapore 1 800 375 8100 taiwan 0800 047 866 other ap countries (65) 6375 8100 europe & middle east austria 0800 001122 belgium 0800 58580 finland 0800 523252 france 0805 980333 germany 0800 6270999 ireland 1800 832700 israel 1 809 343051 italy 800 599100 luxembourg +32 800 58580 netherlands 0800 0233200 russia 8800 5009286 spain 800 000154 sweden 0200 882255 switzerland 0800 805353 opt. 1 (de) opt. 2 (fr) opt. 3 (it) united kingdom 0800 0260637 for other unlisted countries: www.keysight.com/find/contactus (bp-9-7-17) www.keysight.com/find/86100d evolving since 1939 our unique combination of hardware, software, services, and people can help you reach your next breakthrough. we are unlocking the future of technology. from hewlett-packard to agilent to keysight. |
Price & Availability of N1014A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |